rlChanCfg_t Struct Reference

Rx/Tx Channel Configuration. More...

#include <control/mmwavelink/include/rl_sensor.h>

Data Fields
rlUInt16_t	rxChannelEn
rlUInt16_t	txChannelEn
	TX Channel Bitmap b0 TX0 Channel Enable 0 Disable TX Channel 0 1 Enable TX Channel 0 b1 TX1 Channel Enable 0 Disable TX Channel 1 1 Enable TX Channel 1 b2 TX2 Channel Enable 0 Disable TX Channel 2 1 Enable TX Channel 2 . More...
rlUInt16_t	cascading
	Enable Cascading 0x0000 SINGLECHIP: Single mmWave sensor application 0x0001 MULTICHIP_MASTER: Multiple mmwave sensor application. This mmwave is the master chip and generates LO and conveys to other mmwave sensor. This is applicable only in AWR1243. 0x0002 MULTICHIP_SLAVE: Multiple mmwave sensor application. This mmwave is a slave chip and uses LO conveyed to it by the master mmwave sensor. This is applicable only in AWR1243 . More...
rlUInt16_t	cascadingPinoutCfg
	Cascading pinout config b0 - CLKOUT_MASTER_DIS 0 - 20G FM_CW_CLKOUT from master is enabled 1 - 20G FM_CW_CLKOUT from master is disabled b1 - SYNCOUT_MASTER_DIS 0 - 20G FM_CW_SYNCOUT from master is enabled 1 - 20G FM_CW_SYNCOUT from master is disabled b2 - CLKOUT_SLAVE_EN 0 - 20G FM_CW_CLKOUT from slave is disabled 1 - 20G FM_CW_CLKOUT from slave is enabled b3 - SYNCOUT_SLAVE_EN 0 - 20G FM_CW_SYNCOUT from slave is disabled 1 - 20G FM_CW_SYNCOUT from slave is enabled b4 - INTLO_MASTER_EN 0 - Master uses looped back LO 1 - Master uses internal LO b5 - OSCCLKOUT_MASTER_DIS 0 - OSCCLKOUT from master is enabled 1 - OSCCLKOUT from master is disabled b15:6 - RESERVED.

Detailed Description

Rx/Tx Channel Configuration.

Definition at line 200 of file rl_sensor.h.

Field Documentation

rlUInt16_t rlChanCfg_t::cascading

Enable Cascading
0x0000 SINGLECHIP: Single mmWave sensor application
0x0001 MULTICHIP_MASTER: Multiple mmwave sensor application. This mmwave is
the master chip and generates LO and conveys to other mmwave sensor.
This is applicable only in AWR1243.
0x0002 MULTICHIP_SLAVE: Multiple mmwave sensor application. This mmwave is a
slave chip and uses LO conveyed to it by the master mmwave sensor.
This is applicable only in AWR1243
.

Note

: Please refer device data sheet for cascading capability and 20G SYNC pins

Definition at line 245 of file rl_sensor.h.

rlUInt16_t rlChanCfg_t::rxChannelEn

@ brief RX Channel Bitmap
b0 RX0 Channel Enable
0 Disable RX Channel 0
1 Enable RX Channel 0
b1 RX1 Channel Enable
0 Disable RX Channel 1
1 Enable RX Channel 1
b2 RX2 Channel Enable
0 Disable RX Channel 2
1 Enable RX Channel 2
b3 RX3 Channel Enable
0 Disable RX Channel 3
1 Enable RX Channel 3

Definition at line 217 of file rl_sensor.h.

rlUInt16_t rlChanCfg_t::txChannelEn

TX Channel Bitmap
b0 TX0 Channel Enable
0 Disable TX Channel 0
1 Enable TX Channel 0
b1 TX1 Channel Enable
0 Disable TX Channel 1
1 Enable TX Channel 1
b2 TX2 Channel Enable
0 Disable TX Channel 2
1 Enable TX Channel 2
.

Note

: TX2 is supported only on some of the devices, Please refer device data
sheet.

Definition at line 232 of file rl_sensor.h.

---

The documentation for this struct was generated from the following file:

• control/mmwavelink/include/rl_sensor.h